Set Wan Ip Address; Set Wan Stp Bridge - Paradyne JetFusion Integrated Access Device User Manual

set wan ip
address
set wan stp
bridge
2000-A2-GB20-10
Description. Sets the WAN IP address. If you do not enter any optional
parameters, it finds the first available slot, interface, port and connection.
set wan ip address <IPaddress> <netmask> (slot)
(interface) (port) (connection)
IP address
IP address in octal format (999.999.999.999)
netmask
Subnet mask in octal format (255.255.255.255)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ETHERNET | ADSL | XDSL | SDSL
port
Port number (1 to 8)
connection
index of this IP address associated with the port (0-7)
Description. Enables and disables Spanning Tree Protocol on the
specified WAN port.
set wan stp bridge <on | off> (slot) (interface) (port)
status
on | off. on enables STP; off disables STP.
slot
Enter the slot (1-7)
interface
Keyword identifying the interface: list of keywords
port
Port number (1 to 8)
- 234 - February 2004