Menu Map - Paradyne JetFusion Integrated Access Device User Manual

Menu Map

1. Reports
C. Display Current Config
N. Display Network Stats
I. Display Interface Stats
M. Display Media Stats
R. Display Route Table
A. Display ARP Table
B. Display Bridge Forwarding
S. Display Bridge Status
P. Display PPP Authorization
U. Display System Uptime
O. Display Memory Statistics
A. Zero All Statistics
5. Configure
2000-A2-GB20-10
This appendix provide a map of the menu interface for the JetFusion
family of IADs.
ESC
(Log off)
2. Configure
Menu IP Router
C. Configure Port IP Address
U. Unconfigure Port IP Address
M. Configure Port Max Xmt Unit
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned
Database Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
Entries
L. Configure CHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
Q. Configure IP Header Comp.
B. Configure LAN IP Bdcst Dest.
D. Display Route Table
6. Configure
WAN* LAN*
1. 10 Mbps
1. Configure
Full Duplex
Datalink Protocol
2. 10 Mbps
2. Configure
Half Duplex
Physical Interface
3. 100 Mbps
3. Configure
Full Duplex
PVCs/DLCIs
4. 100 Mbps
4. Configure
Half Duplex
ATM / FR Options
5. Auto-negotiate
Full Duplex
6. Auto-negotiate
Half Duplex
7. Auto-negotiate
Speed &
Duplex Mode
- 250 -
Log On
(User ID/Password)
Main Menu
3. Configure
Bridge
G. Enable Bridging Globally
P. Enable Bridging by Port
A. Configure Bridge Aging Timer
T. Enable/Disable Spanning Tree Globally
O. Enable/Disable Spanning Tree by Port
R. Configure Spanning Tree Bridge Priority
Q. Configure Spanning Tree Port Priority
H. Configure Spanning Tree Hello Time
S. Configure Spanning Tree Max Age
F. Configure Spanning Tree Forward Delay
C. Configure Spanning Tree Path Cost
D. Delete Bridge Database Entry
7. Configure 8. Configure
SNMP Login
E. Enable/Disable 1. Change User ID
SNMP via IP
2. Change User
Password
F. Enable/Disable
SNMP via EOC
3. Change NetMan
Password*
A|B. Enable/Disable
SNMP via IP & EOC
4. Change Supervisor Password*
P. Configure System
5. Change Primary RADIUS Server Address
Contact
6. Change Primary RADIUS Encrypt. Secret
N. Configure System
Name
7. Change Secondary RADIUS Server Address
L. Configure System
8. Change Secondary RADIUS Encrypt. Secret
Location
9. Display RADIUS Configuration
C. Configure SNMP
Read/Write Comm.
T. Configure SNMP Trap Host IP Address
U. Enable/Disable SNMP Traps via EOC
D. Configure Restart Trap Max Delay
* Requires a Supervisor password.
9. System
Utilities
Contact
Technical
Support
before using
this menu
February 2004