Table of Contents
Advertisement
2000-A2-GB20-10
Figure 7–27. AAL2/LES CCS-ELCP Configuration Menu
*******************************************
Configuration
*******************************************
V. Variant and Interface Management
N. PSTN NPL Parameters
S. Static CID Allocation
U. User State Control
A. Manual ATM Pace Control
Configuring Variant/Interface Management
Type V to display the Variant/Interface Management menu:
Figure 7–28. Variant/Interface Management Menu
************************************
Variant/Interface Management
************************************
D. Display Variant
P. Configure PSTN Port
I. Configure ISDN Port
L. Load Variant
U. Unload Variant
W. Save Variant
X. Delete Saved Variant
R. Restart Interface
S. Shut Down Interface
NOTE
Use of commands in the Variant/Interface Management menu
is reserved for use by Paradyne network engineers only.
Debugging for AAL2/LES CCS-ELCP
Type D to display the Debugging menu:
Figure 7–29. AAL2/LES CCS-ELCP Debugging Menu
*******************************************
Debugging
*******************************************
D. Set Debugging Options
S. Display V5 FSM States
Setting Debugging Options
Type D to display debugging information for AAL2/LES CCS-ELCP, and
set debugging options.
- 151 -
February 2004
Advertisement
Table of Contents
