Paradyne JetFusion Integrated Access Device User Manual page 197

2000-A2-GB20-10
If the connection is not open, the IAD advises you. Press any key to return
to the NAT Configuration menu.
Table 11–4.NAT Connection Details
Report Entry
Foreign IP
Local IP
Outside port
Inside port
Foreign port
Outgoing packets/# bytes
Incoming packets/# bytes
Type
Seconds since use
TCP/UDP Sequence
Ack
State
Retrys: local, foreign:
Bad checksum: local, foreign
- 178 -
Description
IP address of the foreign device
IP address of the local (LAN) device
Port number assigned by NAT which is
translated by NAT to/from the local port.
Port number of the local (LAN) device;
zero if ICMP protocol
Port number of the foreign device; zero if
ICMP protocol
Packets sent from the local device to the
foreign device.
packets sent from the foreign device to
the local device.
TCP or UDP
Idle time in seconds for the connection
TCP sequence number
TCP ack number
TCP state number (TCP only)
local—TCP retransmissions from local
device to foreign device.
foreign—TCP retransmissions from
foreign device to local device.
local—packets with bad TCP checksums
from local device.
foreign—packets with bad TCP
checksums from foreign device.
February 2004