Managing Copper-Com Call Control - Paradyne JetFusion Integrated Access Device User Manual

Managing
Copper-
Com Call
Control
2000-A2-GB20-10
When your IAD is configured for connection to a Coppercom Voice
Gateway (option V on the VoicePath Configuration menu—P-V), type E on
the Main menu to display the CopperCom Call Control menu:
Figure 7–14. CopperCom Call Control Menu
*******************************************
CopperCom Call Control
*******************************************
S. Statistics
C. Configure
D. Debug
Type the option for the task to perform and proceed to the appropriate
section.
Displaying CopperCom Statistics
Type S to display the CopperCom Statistics menu:
Figure 7–15. CopperCom Statistics Menu
*******************************************
CopperCom Statistics
*******************************************
D. Display Statistics
C. Clear Statistics
Type the option for the command to execute and proceed to the
appropriate section.
Displaying CopperCom Statistics
Type D to display CopperCom statistics. The IAD displays the following
error statistics report:
HEC Errors
CID Errors
Timer Errors
Clearing CopperCom Statistics
Type C to reset CopperCom statistics.
The IAD sets the statistics to zero and displays the menu.
Press Escape to return to the CopperCom Call Control menu.
CopperCom Configuration
Type C to display the CopperCom Configuration menu:
- 142 -
= 0
= 0
= 0
February 2004