Nat Statistics - Paradyne JetFusion Integrated Access Device User Manual

NAT
Statistics
2000-A2-GB20-10
When NAT is enabled, you can review statistics gathered as NAT
operates. To display NAT statistics, type S on the NAT Configuration menu.
The IAD displays the following information (sample):
timeouts: TCP: 300, UDP: 120
local to inet: pkts:0, bytes:0
inet to local: pkts:0, bytes:0
Connections: TCP 0, UDP:0, ICMP:0 created: 0, deleted 0
Total Fragments: local to inet: 0, inet to local: 0
First Fragments: local to inet: 0, inet to local: 0
Queued Fragments: local to inet: 0, inet to local: 0
Deleted Fragments: local to inet: 0, inet to local: 0
Fragment Entries: created: 0, deleted: 0
Errors: cksum: 0, retries: 0, bad packets: 0
Total IP pkts: 0, Reserved addresses: 0, Discarded
packets 0
Press any key to return to the NAT Configuration menu.
Table 11–2.NAT Statistics
Report Entry
Timeouts
Local to inet
inet to Local
Connections
Total Fragments
First Fragments
Queued Fragments
Deleted Fragments
Fragment Entries
Errors
Total IP packets
- 176 -
Description
TCP and UDP Timeout values.
Number of packets and bytes transferring to
the Internet.
Number of packets and bytes receiving from
the Internet.
Number of active TCP, UDP and ICMP
connections, as well as the number created
and deleted.
Total fragments: local to internet, and internet
to local
Number of first fragments: local to internet, and
internet to local
Number of queued fragments: local to internet,
and internet to local
Number of queued fragments: local to internet,
and internet to local
Number of created and deleted fragment
entries.
Number of checksum, retries and bad packets.
Number of IP packets—reserved addresses
and discarded packets.
February 2004