Table of Contents
Advertisement
2000-A2-GB20-10
PPP Statistics Report
This report is available when ATM PVC Encapsulation Type RFC 2364 is
selected.
Table 12–17.PPP Statistics Report
Parameter
Received Packet Information
packets received
discarded for various
reasons
LCP rejects
- echoes
- replies
- discards
Sent Packet Information
packets sent
discarded (link not open)
LCP rejects
- echoes
- replies
- discards
Clearing Interface Statistics
To clear interface statistics, type Z on the Interface Statistics menu. The
IAD displays the Clear Statistics menu:
Figure 12–5. Clear Interface Statistics Menu
I. Clear Interface Statistics
B. Clear Bridge Statistics
D. Clear Frame Relay DLCI Statistics
To reset statistics for a specific interface, type the option.
The IAD immediately resets the statistics for the specified interface, and
displays the menu. Continue resetting statistics, or press Escape to return
to the Interface Statistics menu.
NOTE
You must enable bridging for the Clear Bridge Statistics
option to display. For more information on enabling bridging,
see
Bridge Configuration
- 204 -
Description
Total PPP packets received.
Discard received packets due to:
- Could not allocate PPP packet from internal
queue.
- Discarded all non-LCP packets until link is
opened.
- Discarded all non-AP packets until link is
authenticated
- Value of Length field in the header is zero
No. of LCP Rejects messages received.
No. of LCP Echoes messages received.
No. of LCP Replies messages received.
No. of LCP Discards messages received.
Total PPP packets sent.
Discarded transmitted packets because links are
not opened.
No. of LCP Rejects messages sent.
No. of LCP Echoes messages sent.
No. of LCP Replies messages sent.
No. of LCP Discards messages sent.
on page 118.
February 2004
Advertisement
Table of Contents
