Set Lan Rip; Set Lan Stp Bridge; Set Mgcp Bracketing; Set Mgcp Listening Port - Paradyne JetFusion Integrated Access Device User Manual

set lan rip

set lan stp
bridge
set mgcp
bracketing
set mgcp
listening
port
2000-A2-GB20-10
Description. Enables or disables RIP on a WAN IP port If you do not enter
any optional parameters, the IAD performs the command against the first
available slot, interface and port.
set lan rip <on | off> <version (1 | 2Bcst | 2Mlti)>
(slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) RIP on the specified port.
version 1 | 2Bcst | 2Mlti
Keyword identifying version to implement. (Must be preceded by
keyword version)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (0 to 7)
Description. Enables or disables Spanning Tree Protocol on a LAN port.
set lan stp bridge <on | off> (slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) STP on the specified port.
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)
Description. When communicating with the notified entity (call agent),
indicates whether the UDP port number should be wrapped in brackets for
compatibility.
set mgcp bracketing <on | off>
on | off
Keyword to enable (on) or disable (off) MGCP bracketing.
Description. Specifies the UDP port the Notified Entity (call agent) is
listening on.
set mgcp listening port <port>
- 228 - February 2004