Table of Contents
Advertisement
2000-A2-GB20-10
Table 12–18.Frame Relay Statistics Report
Parameter
Tx congestion counter
CLLM frames Tx
LMI frames Tx
ANSI frames Tx
Last error:
Serial (USI) Statistics Report
Type S to display the Serial Statistics report. This report displays basic
serial (HDLC) transport statistics on the Universal Serial Interlace port.
Table 12–19.Serial Statistics Report
Parameter
bytes rcvd
packets rcvd
discarded, RX Busy
Available Buffers (PCB
Entries)
discarded, RX error:
Rx Clock glitch
PLL error
Frame too long
Non octet aligned
Abort seq
CRC error
Rx overrun
CD lost
Out Of Buffers (PCBs)
Lack of resources
- 207 -
Description
No. of frames dropped due to congestion to
maintain committed information rate.
No. of CLLM frames received
No. of LMI frames received
No. of ANSI frames received
Description of last recorded error since reset.
Description
Total data received in bytes.
No. of Serial packets received.
No. of discarded received packets due to packets
Overrun.
Current available internal PCB (Packets Buffers)
entries.
No. of discarded due to the following reasons:-
Could not allocate packet buffers.
Total frames discarded on this port due to receives
clock glitch errors.
Total frames discarded on this port due to receives
phase lock loop errors.
Total frames discarded on this port because the
received frame was too long.
Total frames discarded on this port because the
received frame was not an integral no. of octets.
No. of frames aborted on the port due to receiving
an abort sequence since system re-initialization
and the port state was 'up' or 'test'.
Total frames discarded on this port due to received
CRC errors.
Total frames discarded on this port due to receiver
overruns errors.
Total frames discarded on this port due to lost
Carrier Detect.
No. of times that could not allocate a packet buffer
for received packets.
Discarded received packets because a PCB for
Transmitted/Received Pool Buffers could not be
allocated.
February 2004
Advertisement
Table of Contents
