Deleting A Pvc - Paradyne JetFusion Integrated Access Device User Manual

2000-A2-GB20-10
Setting up AAL2/LES
1. The IAD displays the AAL2 Audio Profile Format menu:
Figure 4–51. AAL2 Audio Profile Format Menu
***********************************
AAL2 Audio Profile Format
***********************************
Current Audio Profile Format: NONE
1. ITU
2. ATM Forum
To select ITU, type 1.
2. The IAD displays the AAL2 Audio Profile menu with available options:
Figure 4–52. AAL2 Audio Profile Menu
***********************************
AAL2 Audio Profile
***********************************
Current Audio Profile: NONE
9. ATM Forum #9 - 44 octets, G.711-64
A. ATM Forum #10 - 44 octets, G.711-64, G.726-32
B. ATM Forum #11 - 40 octets, G.711-64, G.726-32
3. The IAD displays the Peak Cell Rate Configuration menu:
Figure 4–53. ATM PCR Configuration Menu
*******************************************
ATM Peak Cell Rate (PCR) Configuration
******************************************
Current line speed for this interface is 1544000 bps
Please type a PCR value, or
Press ENTER to accept allowed maximum PCR value for
this line speed
Enter Peak Cell Rate (PCR) [3641 cells per second]:
Type the PCR value or press Enter to set the PCR to the maximum
rate for the current line speed.
4. The IAD saves the configuration and displays the ATM PVC
Configuration menu.
5. Reset the IAD (page 14) when you finish PVC configuration.

Deleting a PVC

To delete a PVC:
1. Type 3 to select Delete PVC.
2. The IAD displays the port list and a prompt.
Type the port number to delete and press Enter.
- 83 - February 2004