Table of Contents
Advertisement
2000-A2-GB20-10
The table following lists the IAD provisioning parameters on the voice
gateway that identifies the IAD and affects its performance. Verify these
parameters when troubleshooting the IAD.
Table 14–2.IAD Provisioning Parameters
Parameter
ID
Serial Number
Profile Name
Interface Group
ATM Protection Group ATM Protection Group to which the IAD is
VPI
VCI
Transport
Signalling
Compression
Echo Cancellation
Admin
Operational
- 246 -
Description
Identification number of the IAD (read only)
IAD serial number (read only). Same as MAC
Address
IAD profile name
Identifies the Interface Group that will deliver
the subscriber's calls.
assigned.
Virtual Path Identifier that identifies the
subscriber-specific logical path between the
voice gateway and the ATM network.
Virtual Circuit Identifier that identifies the
subscriber-specific virtual circuit between the
voice gateway and the ATM network (VCI must
be specific; between 32 and 1023).
ATM, or Frame Relay
Loop Start or Ground Start
No compression, 32k, or 16k
On or off
Service state of IAD: locked or unlocked
State of IAD (read only)
February 2004
Advertisement
Table of Contents
