Table of Contents
Advertisement
2000-A2-GB20-10
G2237 xDSL Statistics Report
Table 12–21.G2237 xDSL Statistics Report
Parameter
Operational State
Start Progress
Operational Seconds
Up/Down Counter
Received SNR
Mean SQ Error
Initial Received SNR
Loop Attenuation
Actual PSD Mask
Framer Sync
LOSW Status
Total Seconds
Errored Seconds
CRC Count
LOSW Defect Count
FEBE Count
Tip/Ring
Transmit Power
Receiver Gain
G.SHDSL
Remote Country Code
Remote Provider Code
H.DSL2
- 210 -
Description
Current operation state.
Current start progress.
Total Operation Time in Seconds
No. of times modem has come up.
No. of SNR (Signal-to-Noise Ration) received.
No. of mean SQ error used to compute received
signal to noise ratio.
No. of the Initial Received SNR (Signal-to-Noise
Ration)
Current level of Loop Attenuation
Actual PSD mask is used for the line code
comparison. It is acknowledged that an optimized
PSD mask can be decided only after line code
decision is made. The transmit power back-off of
remote HTU
Current framer synchronization status: In-Sync /
Out of Sync
Current status of LOSW (Loss of Sync Defect): ON
/ OFF
Total seconds of statistics gathering.
Total errored seconds received of CRC and LOSW
errors found.
No. of CRC errors (near end) received.
No. of LOSW Defect (Loss of Sync Defect) errors
received.
No. of Far End Block Error Count (far end).
Current status of Tip/Ring: Normal / Reserved.
Nominal transmit power.
Current no. of total receiver gain.
Current Remote Country Code.
Current Provider Code.
February 2004
Advertisement
Table of Contents
