Paradyne JetFusion Integrated Access Device User Manual page 178

Integrated access device
Table of Contents

Advertisement

2000-A2-GB20-10
4. The IAD displays an update option. Respond Y to override the lease
time default for this entry:
Enter Y to enter a value for Lease Time
Enter N to use a default value
Enter Lease Time in seconds for this Client (3600):
Type the lease time for this entry and press Enter.
5. The IAD displays an update option. Respond Y to override the IP
address default for this entry:
Enter Y to enter a value for IP Address
Enter N to use a default value
Current IP address = 0.0.0.0
Enter new IP address:
Type the IP address for this entry and press Enter.
6. The IAD displays an update option. Respond Y to override the subnet
mask default for this entry:
Enter Y to enter a value for Subnet Mask
Enter N to use a default value
Current Subnet Mask = 0.0.0.0
Enter new Subnet Mask:
Type the subnet mask for this entry and press Enter.
7. The IAD displays an update option. Respond Y to override the default
gateway for this entry:
Enter Y to enter a value for Default Gateway
Enter N to use a default value
Current Gateway address = 0.0.0.0
Enter new Gateway IP address:
Type the default gateway address for this entry and press Enter.
8. The IAD displays an update option. Respond Y to override the DNS
server IP address default for this entry:
Enter Y to enter a value for DNS Server
Enter N to use a default value:
Current DNS Server address = 0.0.0.0
Enter new DNS Server IP address:
Type the default DNS Server IP address for this entry and press Enter.
9. The IAD displays an update option. Respond Y to override the
NetBIOS Server IP address default for this entry:
Enter Y to enter a value for NetBIOS Server
Enter N to use a default value:
Current NetBIOS Server address = 0.0.0.0
Enter new NetBIOS Server IP address:
Type the default NetBIOS Server IP address for this entry and press
Enter.
10. The IAD displays an update option. Respond Y to override the
NetBIOS Node Type default for this entry:
Enter Y to enter a value for NetBIOS Node Type
Enter N to use a default value
*******************************************
NetBIOS Type Configuration Menu
- 159 -
February 2004

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000Jetfusion

Table of Contents