Front Panel Power And Status Indicators - Paradyne JetFusion Integrated Access Device User Manual

2000-A2-GB20-10
Gateway manufacturers. These IADs prioritize voice packets and
dynamically allocate bandwidth between voice and data services.
Features
‹
Interoperable with DSLAMs based on Alcatel, Texas Instruments,
MetaLink, and Globespan chip sets. These include Lucent Stinger/
TNT, Nokia Speedlink System, Promatory IMAS, AccessLan
PacketLoop, Accelerated Networks AN-3200, Coppermountain
CopperEdge, and Paradyne GranDSLAM DSLAMs, for example.
‹
Seamless voice and high-speed data integration over xDSL or T1/ITE1
‹
Supports data rates from 144 Kbps to 2.3 Mbps and customer premise
interfaces including POTS, 10/100BaseT Ethernet
‹
Compatible with WAN protocols including ATM and Frame Relay
‹
RJ21X POTS interface with Loop Start or Ground Start
‹
Universal Serial Interface supports V.35 and EIA-530
‹
Dynamic and static IP routing and bridging capabilities
‹
Firewall support via IP filtering
‹
DHCP and NAT to support IP address management
‹
Management capabilities including Telnet, SNMP and TFTP
16/24-port IADs are characterized by different WAN interfaces and
different voice capacity:
‹
JF2216 IAD—provides WAN access over T1/E1, and telephone
support for 16 voice ports via RJ21X connector.
‹
JF2216c IAD—provides WAN access over channelized T1, and
telephone support for 16 voice ports via RJ21X connector.
‹
JF2316 IAD—provides WAN access over SDSL, and telephone
support for 16 voice ports via RJ21X connector.
Physical and electrical specifications for each IAD are listed in Appendix
C, JetFusion IAD Specifications

Front Panel Power and Status Indicators

The front panel of the IAD contains several LEDs. These LEDs provide
general information about the operational status of the IAD.
Figure 1–4. 16/24-Port IAD Front Panel
Front Panel
POWER LAN LAN WAN VOICE DCE
LINK ACT LINK LINK
Status Indicators
- 5 -
on page 254.
DCE
ACT
03-17483
February 2004