Paradyne JetFusion Integrated Access Device User Manual page 70

POWER LAN LINK LAN ACT WAN LINK VOICE
6
POWER LAN LINK LAN ACT WAN LINK VOICE
2000-A2-GB20-10
Identifying your WAN Interface and Datalink Protocol
The sections you'll use to perform WAN configuration depend on the IAD
model and the datalink protocol you choose.
Voice and data traffic are each carried in their own PVCs (ATM protocol) or
DLCIs (Frame Relay protocol). You may define up to 8 PVCs or DLCIs for
voice and data.
For a voice circuit, a single PVC or DLCI can carry the voice traffic for all
voice ports on the IAD. Voicepath configuration is described in a separate
chapter—Voice Path Configuration
To proceed, identify your IAD and datalink protocol in the tables following,
and perform the listed tasks.
JF2004 ADSL with ATM
JF2004i
1. Set the datalink protocol to ATM (page 53)
JF2008
2. Configure ADSL (page 64)
3. Configure PVCs (page 75)
4. Configure ATM (page 84)
5. Configure the voice path (page 127)
JF2208 T1 with Frame Relay
JF2216
1. Set the datalink protocol to Frame Relay (page 53)
2. Configure T1 (page 66)
3. Configure DLCIs (page 86)
4. Configure Frame Relay options (page 90)
5. Configure the voice path (page 127)
T1 with ATM
1. Set the datalink protocol to ATM (page 53)
2. Configure T1 (page 64)
3. Configure PVCs (page 75)
4. Configure ATM (page 84)
5. Configure the voice path (page 127)
E1 with Frame Relay
1. Set the datalink protocol to Frame Relay (page 53)
2. Configure E1 (page 64)
3. Configure DLCIs (page 86)
4. Configure Frame Relay options (page 90)
5. Configure the voice path (page 127)
E1 with ATM
1. Set the datalink protocol to ATM (page 53)
2. Configure E1 (page 64)
3. Configure PVCs (page 75)
4. Configure ATM (page 84)
5. Configure the voice path (page 127)
- 51 -
on page 127.
February 2004