Network Interface Options Menu - Paradyne 8779 User Manual

A. Configuration Options

Network Interface Options Menu

For Network Interface Options, refer to
access the Network Interface Options screen, follow this menu selection
sequence:
Table A-1. Network Interface Options (1 of 4)
A-2
NOTE:
All changes to configuration options must be saved. Refer to
Configuration Options
Main Menu Configuration
main/config/network
Slot: 18
Port 2
Port Status
Margin Threshold:
Excessive Error Rate Threshold:
AutoRate:
DSL Line Rate:
EIA-530 Payload Rate
Transmit Attenuation
Peer IP Address:
DS0 Cross Connect Line Framing:
Circuit Identifier:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Port Status
Possible Settings: Enable, Disable
Default Setting: Enable
Determines whether the port can be configured and used.
Enable – The port can be configured and used.
Disable – The port cannot be configured or used.
Margin Threshold
Possible Settings: –5db, –4db, –3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db,
6db, 7db, 8db, 9db, 10db
Default Setting: 0db
Determines the level, expressed in decibels, at which a signal-to-noise margin condition is
recognized.
–5db to 10db – Sets the margin threshold to this value.
May 2002
in Chapter 3, Initial Startup and Configuration .
Table A-1, Network Interface
Current Configuration
NETWORK INTERFACE OPTIONS
Enable
0db
1E–6
Disable
1552 Kbps
1536 Kbps
0dB
111.255.255.000
ESF
Saving
Options. To
Network
Model: 87xx
Clear
Clear
MainMenu Exit
8700-A2-GB20-40