System Uptime Report; Memory Statistics Reports - Paradyne JetFusion Integrated Access Device User Manual

System
Uptime
Report
Memory
Statistics
Reports
2000-A2-GB20-10
Otherwise, the following information is displayed for each entry:
Table 12–30.PPP Authorization Report
Parameter
Authorization type
Slot #/Interface #/Port #
Userid/Password/Peer Name
Press any key to return to the Reports menu.
Type U on the Reports menu to display the amount of time elapsed since
the IAD was reset:
The system has been running for 11 hours,
45 minutes, 26 seconds.
Press any key to return to the Reports menu.
Type O on the Reports menu to display the Memory Statistics menu. The
Memory Statistics menu (1-O) contains two memory display commands:
Figure 12–8. Memory Statistics Menu
***************************************************
Memory Statistic Menu
***************************************************
M. Display System Memory Statistic
T. Display Kernel Tasks Memory Statistic
To display a specific memory statistic report, type the option. For details,
see the corresponding section, following.
System Memory Statistics Report
Type M on the Memory Statistics menu to display the System Memory
Statistics report. The System Memory Statistics report displays the
following details about system memory:
Total Memory Size
Total Allocated Memory
Total Free Memory
Kernel Memory Size
Kernel Memory Allocated
Allocated Blocks
Largest Alloc Block Size 159KB (163248 Bytes)
Highest Memory Used
- 219 -
Description
None | Password Authentication Protocol (PAP)
Client | PAP Server |Challenge Handshake
Authentication Protocol (CHAP) Client | CHAP
Server
active slot for the PPP interface
values for the PPP interface
8192KB (8388608 Bytes)
7454KB (7633688 Bytes)
737KB (754920 Bytes)
1152KB (1179648 Bytes)
901KB (922848 Bytes)
1143 Blocks
901KB (922959 Bytes)
February 2004