Set Lan Bridge; Set Lan Ip Address - Paradyne JetFusion Integrated Access Device User Manual

set lan
bridge
set lan ip
address
2000-A2-GB20-10
Description. Enables or disables bridging on a LAN port.
set lan bridge <on | off> (slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) bridging on the specified port.
IP address
IP address in octal format (999.999.999.999)
netmask
Subnet mask in octal format (255.255.255.255)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ETHERNET | ADSL | XDSL | SDSL
port
Port number (1 to 8)
Description. Sets the LAN IP address. If you do not enter any optional
parameters, the IAD sets the address on the first available slot, interface,
port and connection. If connection is omitted, the first is used.
set lan ip address <IPaddress> <netmask> (slot)
(interface) (port) (connection)
IP address
IP address in octal format (999.999.999.999)
netmask
Subnet mask in octal format (255.255.255.255)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ETHERNET | ADSL | XDSL | SDSL
port
Port number (1 to 8)
connection
Index of this IP address associated with the port (0-7)
- 227 - February 2004