Table of Contents
Advertisement
Menu Navigation
The CSU/DSU should operate using the default (factory-set) configuration options.
Refer to the following table for help in navigating the menus.
Press the . . .
Esc key
Tab key, and
Up (↑), Down (↓ ),
Left (←), Right (→)
Arrow keys
Enter or Return key
Spacebar
As an example, follow these steps to go to the Configuration Edit/Display menu so you
can start setting up the unit.
Procedure
To load a configuration for editing:
1. From the Main Menu, press the Tab key twice, or press the down (↓) arrow twice,
so the cursor is on Configuration.
2. Press Enter to select Configuration. The Load Configuration From menu appears.
3. Press Enter to select Current Configuration (the cursor is already on this selection).
The Configuration Edit/Display menu appears.
This sequence of steps would be shown as the menu selection sequence:
Main Menu → Configuration
Menu Hierarchy
The Menu Hierarchy on the following pages shows the organization of the iMarc DSL
CSU/DSU's screens, which can help you navigate the menus and access information.
To . . .
Go back one screen or menu level. See
below.
Move the cursor from one menu item to the next.
Complete the menu or option selection.
Display the next available setting when changing a
configuration option. All the available settings for an option
appear at the bottom of the screen.
15
Menu
Hierarchy,
Advertisement
Table of Contents
