Set Mgcp Notified Entity; Set Mgcp Signaling Connection; Set Mgcp Signaling Port; Set Mgcp Signaling Tos - Paradyne JetFusion Integrated Access Device User Manual

set mgcp
notified
entity
set mgcp
signaling
connection
set mgcp
signaling
port
set mgcp
signaling
tos
set mgcp
voice
connection
2000-A2-GB20-10
port
UDP Port number (any valid port number; usually 2427 or 2727)
Description. Specifies the DNS name or IP address of the notified entity
(call agent). You can specify one notified entity in the CLI. Use the menu
interface to set up a maximum of four call agents.
set mgcp notified entity <domain name | IP address>
domain name | IP address
Fully-qualified domain name or IP address of the call agent.
Description. Specifies the call agent slot, interface, port, and connection.
set mgcp signaling connection (slot) (interface) (port)
(connection)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)
connection
Index of this connection number associated with the port (0-7)
Description. Specifies the UDP port the IAD uses for incoming MGCP
messages.
set mgcp signaling connection <port>
port
UDP Port number (any valid port number; usually 2427)
Description. Specifies the TOS byte value for signaling packets.
set mgcp signaling tos <byte value>
byte value
Integer (1...7) to specify the TOS byte value.
Description. Specifies the slot, interface, port, and connection for the
voice connection.
set mgcp voice connection (slot) (interface) (port)
(connection)
slot
- 229 - February 2004