Set-Attr-Log - Paradyne Jetstream CPX-1000 Reference Manual

1000-A2-GH30-00

SET-ATTR-LOG

Security
Description
Related Messages
Errors Generation
February 2003
Read/Write
Set Attribute Log. This command instructs the CPX-1000 to set the
attributes associated with a message log. If a log already exists, the
new values specified by the command replace the previous values.
Note
A copy of the log is automatically created.
-
INIT LOG
< acility>
REPT ALM OCF
REPT ALM EQPT
REPT ALM IADPORT
REPT ALM PROTGROUP
REPT DBCHG
REPT EVT IAD
REPT EVT IG
- -< ype>
RTRV ALM AIDT
- -< ype>
RTRV ATTR AIDT
- -
RTRV ATTR LOG
-
RTRV LOG
- -< ype>
SET ATTR AIDT
All Default errors.
SET-ATTR-LOG:[TID]:
<log_id>:[CTAG]::<lognm>,[<logdur>];
Input Format
SET-ATTR-LOG:
TID:AID:CTAG::ALM,CLR,SYSADMIN,LOGDUR
;
Figure 3–31. Set Attribute Log Input Format and
Example
3. TL1 Commands and Messages
< n acility>
REPT ALM DS F
REPT ALM ENV
REPT ALM IAD
REPT ALM IG
< ype>
REPT COND AIDT
REPT EVT EQPT
REPT EVT IADPORT
REPT EVT PROTGRP
- -
RTRV ALM ENV
- -
RTRV ATTR ENV
- -< ype>
RTRV COND AIDT
- - 1
RTRV LOG TL LOG
- -
SET ATTR ENV
Example
3-57