Outputting Multiple Plots To A Single Page Using A Printer - Agilent Technologies 8719ES User Manual

Outputting Multiple Plots to a Single Page Using a Printer

Refer to "Plotting Multiple Measurements Per Page Using a Pen Plotter" on page 4-20
the naming conventions for plot files that you want printed on the same page. You can use
the following batch file to automate the plot file printing. In this example, the batch file is
be saved as "do_plot.bat." However, before running this batch file, you must first create the
hpglinit file and the exithpgl file described in
HPGL Compatible Printer" on page
rem ________________________________________________________
rem Name: do_plot
rem
rem Description:
rem
rem output HPGL initialization sequence to a file:spooler
rem append all the requested plot files to the spooler
rem append the formfeed sequence to the spooler
rem copy the file to the printer
rem
rem (This routine uses COPY instead of PRINT because COPY
rem will not return until the action is completed. PRINT
rem will queue the file so the subsequent DEL will likely
rem generate an error. COPY avoids this.)
rem ________________________________________________________
echo off
type hpglinit > spooler
for %%i in (%1) do type %%i >> spooler
type exithpgl >> spooler
copy spooler LPT1
del spooler
echo on
For example, you have the following list of files to plot:
PLOT00.LL
PLOT00.LU
PLOT00.RL
PLOT00.RU
You would invoke the batch print as follows:
C:> do_plot PLOT00.*
Printing, Plotting, and Saving Measurement Results
Outputting Multiple Plots to a Single Page Using a Printer
"Outputting Plot Files from a PC to an
4-25.
for
4- 27