Saving In Graphical (Jpeg) Form - Agilent Technologies 8719ES User Manual

Printing, Plotting, and Saving Measurement Results
Saving Measurement Results

Saving in Graphical (JPEG) Form

Graphical measurement results can be saved in JPEG format and used as an illustration
in a text editor or desktop publishing application.
JPEG file. This is done by storing a measurement using
on
DATA AND MEMORY
1. Press
Save/Recall
2. Make sure that
GRAPH FMT [JPG]
3. Make sure that
FILETYPE: GRAPHIC
softkey so that GRAPHIC is underlined.
4. Insert a 3.5-inch floppy disk in the network analyzer's disk drive.
5. Press
SAVE FILE
The graphic file may be retrieved from the floppy disk on personal computer and can be
imported into an application that accepts graphics in the JPEG format.
NOTE When saving measurement results graphically, make sure that no onscreen
measurement data is displayed as white. Since media color is often white, any
measurement data printed using white will not be visible.
You may change the analyzer to the factory default color settings by pressing
Copy
However, to maintain your current color settings (except white), check the
measurement color settings by pressing
PRINT COLORS
colors. To modify any of the measurement colors, select the measurement and
then choose another color from the list of colors that is displayed.
1. The network analyzer firmware is based in part on the work of the Independent JPEG Group.
4-46
for each of the four channels.
SAVE FILE FORMATS
is displayed.
to save the display as a graphic in the JPEG format.
DEFINE PRINT DEFAULT PRNT SETUP
. Press
MORE
1
Up to eight traces may be saved in the
→
DATA
.
is underlined. If it is not underlined, press the
DEFINE PRINT
Copy
to check the remaining measurement
and turning
MEMORY
to correct this problem.