Agilent Technologies 8719ES User Manual page 152

Making Mixer Measurements (Option 089 Only)
Conversion Loss Using the Frequency Offset Mode
4. Turn on frequency offset operation by pressing
Notice in this high-side LO, down conversion configuration, the analyzer's source is
actually sweeping backwards, as shown in
The measurement setup diagram is shown in
are shown in this illustration.
Figure 2-13 Diagram of Measurement Frequencies
Figure 2-14 Measurement Setup from Display
2-18
FREQS OFFS ON
Figure 2-13.
Figure 2-14. Note the RF frequency values
.