Safety Considerations; Safety Earth Ground; Before Applying Power - Agilent Technologies 8719ES User Manual

Safety Considerations

NOTE This instrument has been designed and tested in accordance with IEC
Publication 1010, Safety Requirements for Electronics Measuring Apparatus,
and has been supplied in a safe condition. This instruction documentation
contains information and warnings which must be followed by the user to
ensure safe operation and to maintain the instrument in a safe condition.

Safety Earth Ground

This is a Safety Class I product (provided with a protective earthing
WARNING
ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
CAUTION Always use the three-prong AC power cord supplied with this product. Failure
to ensure adequate earth grounding by not using this cord may cause product
damage.

Before Applying Power

CAUTION Install the instrument so that the ON/OFF switch is readily identifiable and
is easily reached by the operator. The ON/OFF switch or the detachable power
cord is the instrument disconnecting device. It disconnects the mains circuits
from the mains supply before other parts of the instrument. Alternately, an
externally installed switch or circuit breaker (which is readily identifiable
and is easily reached by the operator) may be used as a disconnecting device.
CAUTION Before switching on this instrument, make sure that the analyzer line voltage
selector switch is set to the voltage of the power supply and the correct fuse is
installed. Assure the supply voltage is in the specified range.
If this product is to be energized via an autotransformer make sure the
CAUTION
common terminal is connected to the neutral (grounded side of the mains
supply).
Safety and Regulatory Information
Safety Considerations
8- 5