Safety and Regulatory Information
Safety Considerations
Servicing
WARNING
No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
These servicing instructions are for use by qualified personnel only.
WARNING
To avoid electrical shock, do not perform any servicing unless you
are qualified to do so.
The opening of covers or removal of parts is likely to expose
WARNING
dangerous voltages. Disconnect the instrument from all voltage
sources while it is being opened.
WARNING
Adjustments described in this document may be performed with
power supplied to the product while protective covers are removed.
Energy available at many points may, if contacted, result in personal
injury.
WARNING
The power cord is connected to internal capacitors that may remain
live for 10 seconds after disconnecting the plug from its power
supply.
WARNING
For continued protection against fire hazard replace line fuse only
with same type and rating (115V operation: T 5A 125 V UL/CSA;
230V operation: T 4A H 250V IEC). The use of other fuses or material
is prohibited.
8-6