Table of Contents
Advertisement
Step
6.
Configure a backup LDP PW
and enter VSI LDP backup
PW view.
7.
Return to user view.
8.
Manually switch traffic of the
specified PW to its backup
PW.
Configuring MAC address learning
Step
1.
Enter system view.
2.
Enter VSI view.
3.
Enable MAC address
learning for the VSI.
Enabling SNMP notifications for L2VPN PW
This feature enables the L2VPN module to generate SNMP notifications when the PW status
changes. The generated SNMP notifications are sent to the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
To enable SNMP notifications for L2VPN PW:
Step
1.
Enter system view.
2.
Enable SNMP notifications
for L2VPN PW.
Displaying and maintaining VPLS
Execute display commands in any view and reset commands in user view.
Command
*
backup-peer ip-address [ pw-id
pw-id ] [ pw-class class-name |
tunnel-policy tunnel-policy-name ]
*
return
l2vpn switchover peer ip-address
pw-id pw-id
Command
system-view
vsi vsi-name [ hub-spoke ]
mac-learning enable
Command
system-view
snmp-agent trap enable l2vpn
[ pw-up-down | pw-delete ] *
468
Remarks
By default, no backup LDP PW is
configured.
If both a default PW ID in the
default-pw-id command and a
PW ID in the backup-peer
command are configured, the
PW ID in the backup-peer
command is used. If only a
default PW ID is configured, the
default PW ID is used. If no
default PW ID is configured, you
must provide a PW ID in the
backup-peer command.
N/A
N/A
Remarks
N/A
N/A
By default, MAC address learning is
enabled for a VSI.
Remarks
N/A
By default, SNMP notifications for
L2VPN PW are enabled.
Advertisement
Table of Contents
