Table of Contents
Advertisement
[Hub-PE] mpls lsr-id 3.3.3.9
[Hub-PE] mpls ldp
[Hub-PE–ldp] quit
# Enable L2VPN.
[Hub-PE] l2vpn enable
# Create VSI aaa, enable hub-spoke capability for the VSI, specify the PW signaling protocol as
LDP, and establish PWs to Spoke-PE 1 and Spoke-PE 2.
[Hub-PE] vsi aaa hub-spoke
[Hub-PE-vsi-aaa] pwsignaling ldp
[Hub-PE-vsi-aaa-ldp] peer 1.1.1.9 pw-id 500
[Hub-PE-vsi-aaa-ldp-1.1.1.9-500] quit
[Hub-PE-vsi-aaa-ldp] peer 2.2.2.9 pw-id 500
[Hub-PE-vsi-aaa-ldp-2.2.2.9-500] quit
[Hub-PE-vsi-aaa-ldp] quit
[Hub-PE-vsi-aaa] quit
# Bind VSI aaa to GigabitEthernet 2/0/1 (the interface connected to Hub-CE), and specify the
AC connected to the Hub-CE as the hub link.
[Hub-PE] interface gigabitethernet 2/0/1
[Hub-PE-GigabitEthernet2/0/1] xconnect vsi aaa hub
[Hub-PE-GigabitEthernet2/0/1] quit
Verifying the configuration
# Verify that PWs in up state have been established on each PE.
[Spoke-PE1] display l2vpn pw verbose
VSI Name: aaa
Peer: 3.3.3.9
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs
[Spoke-PE2] display l2vpn pw verbose
VSI Name: aaa
Peer: 3.3.3.9
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs
[Hub-PE] display l2vpn pw verbose
VSI Name: aaa
PW ID: 500
: LDP
: 8
PW State : Up
: 1276
Out Label: 1274
: 1500
: Main, Hub link
: -
: -
: 0x560000000
: 1031
PW ID: 500
: LDP
: 8
PW State : Up
: 1275
Out Label: 1273
: 1500
: Main, Hub link
: -
: -
: 0x660000000
: 1032
491
Advertisement
Table of Contents
