Mpls Te Configuration Examples; Establishing An Mpls Te Tunnel Over A Static Crlsp - HP HPE FlexNetwork MSR Router Series Configuration Manual

Task
Display bandwidth information on MPLS
TE-enabled interfaces.
Display information about discovered PCEs.
Display PCC and PCE peer information.
Display PCC and PCE statistics.
Display MPLS TEDB information.
Display information about MPLS TE tunnel
interfaces.
Display information about PCEs discovered by
OSPF.
Display link and node information in an OSPF
TEDB.
Display network information in an OSPF TEDB.
Display OSPF tunnel interface information.
Display information about tunnel bundle
interfaces and their member interfaces.
Reset the automatic bandwidth adjustment
function.
Clear PCC and PCE statistics.

MPLS TE configuration examples

Establishing an MPLS TE tunnel over a static CRLSP

Network requirements
Router A, Router B, and Router C run IS-IS.
Establish an MPLS TE tunnel over a static CRLSP from Router A to Router C.
The MPLS TE tunnel requires a bandwidth of 2000 kbps. The maximum bandwidth of the link that the
tunnel traverses is 10000 kbps. The maximum reservable bandwidth of the link is 5000 kbps.
Command
display mpls te link-management
bandwidth-allocation [ interface interface-type
interface-number ]
display mpls te pce discovery [ ip-address ]
[ verbose ]
display mpls te pce peer [ ip-address ] [ verbose ]
display mpls te pce statistics [ ip-address ]
display mpls te tedb { { isis { level-1 | level-2 } | ospf
area area-id } | link ip-address | network | node [ local |
mpls-lsr-id ] | summary }
display mpls te tunnel-interface [ tunnel number ]
display ospf [ process-id ] [ area area-id ] mpls te pce
[ originate-router advertising-router-id | self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te
advertisement [ originate-router advertising-router-id |
self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te
network [ originate-router advertising-router-id |
self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te
tunnel
display tunnel-bundle [ number ]
reset mpls te auto-bandwidth-adjustment timers
reset mpls te pce statistics [ ip-address ]
106