HP HPE FlexNetwork MSR Router Series Configuration Manual page 159

Ingress LSR ID
Signaling
Resv Style
Tunnel mode
Reverse-LSP name
Reverse-LSP LSR ID
Class Type
Reserved Bandwidth
Setup Priority
Affinity Attr/Mask
Explicit Path
Backup Explicit Path : -
Metric Type
Record Route
FRR Flag
Backup Bandwidth Flag: Disabled
Backup Bandwidth
Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Execute the display mpls lsp command on Router B. The output shows that the current bypass
tunnel that protects the primary CRLSP is Tunnel 50.
[RouterB] display mpls lsp
FEC
2.2.2.2/51/16802
2.2.2.2/1/16802
Backup
2.2.2.2/50/16802
3.2.1.2
3.3.1.2
# Execute the display rsvp lsp verbose command on Router B to display detailed information
about MPLS TE tunnel 1, the tunnel for the primary CRLSP. The output shows that Tunnel1 is
protected by the bypass tunnel Tunnel50, and the protected node is 3.1.1.1.
[RouterB] display rsvp lsp tunnel-id 1 verbose
Tunnel name: Tunnel1
Destination: 4.4.4.4
Tunnel ID: 1
LSR type: Transit
Setup priority: 7
In-Label: 1150
In-Interface: GE2/0/1
Nexthop: 3.1.1.2
Include-Any: 0
: 2.2.2.2 Egress LSR ID
: RSVP-TE Static CRLSP Name
: SE
: -
: -
: - Reverse-LSP Tunnel ID: -
: CT0 Tunnel Bandwidth
: 0 kbps
: 7 Holding Priority
: 0/0
: -
: TE
: Enabled Record Label
: Disabled Bandwidth Protection : Disabled
Backup Bandwidth Type: -
: -
: Yes Auto Created
: Disabled
: 3 Retry Interval
: Disabled Reoptimization Freq
: None Backup LSP ID
: Disabled Auto Bandwidth Freq
: - Max Bandwidth
: -
Proto In/Out Label
RSVP -/3
RSVP -/1151
-/3
RSVP -/3
Local -/-
Local -/-
149
Interface/Out NHLFE
POS2/2/0
GE2/0/2
Tun50
POS2/2/1
POS2/2/1
POS2/2/0
Source: 1.1.1.1
LSP ID: 16802
Direction: Unidirectional
Holding priority: 7
Out-Label: 1151
Out-Interface: GE2/0/2
Exclude-any: 0
Include-all: 0
: 3.3.3.3
: -
: 0 kbps
: 7
: Disabled
: Yes
: 2 sec
: -
: -
: -
: -