Table of Contents
Advertisement
[RouterA] display interface tunnel
Tunnel4 current state: UP
Line protocol current state: UP
Description: Tunnel3 Interface
The Maximum Transmit Unit is 64000
Internet Address is 9.1.1.1/24 Primary
Tunnel source unknown, destination 3.3.3.9
Tunnel bandwidth 64 (kbps)
Tunnel TTL 255
Tunnel protocol/transport CR_LSP
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 1911 bytes/sec, 15288 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
1526 packets output, 22356852 bytes, 0 drops
# Execute the display mpls te tunnel-interface command on Router A to display detailed
information about the MPLS TE tunnel.
[RouterA] display mpls te tunnel-interface
Tunnel Name
Tunnel State
Tunnel Attributes
LSP ID
Admin State
Ingress LSR ID
Signaling
Resv Style
Tunnel mode
Reverse-LSP name
Reverse-LSP LSR ID
Class Type
Reserved Bandwidth
Setup Priority
Affinity Attr/Mask
Explicit Path
Backup Explicit Path : -
Metric Type
Record Route
FRR Flag
Backup Bandwidth Flag: Disabled
Backup Bandwidth
Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
: Tunnel 4
: Up (Main CRLSP up, Shared-resource CRLSP down)
:
: 48960
Tunnel ID
: Normal
: 1.1.1.1
Egress LSR ID
: RSVP-TE
Static CRLSP Name
: SE
: -
: -
: -
Reverse-LSP Tunnel ID: -
: CT0
Tunnel Bandwidth
: 0 kbps
: 7
Holding Priority
: 0/0
: pri-path
: TE
: Enabled
Record Label
: Enabled
Bandwidth Protection : Disabled
Backup Bandwidth Type: -
: -
: No
Auto Created
: Disabled
: 10
Retry Interval
: Disabled
Reoptimization Freq
: None
Backup LSP ID
: Disabled
Auto Bandwidth Freq
: -
Max Bandwidth
: -
141
: 4
: 3.3.3.3
: -
: 0 kbps
: 7
: Enabled
: No
: 2 sec
: -
: -
: -
: -
Advertisement
Table of Contents
