Setting A Dscp Value For Outgoing Rsvp Packets - HP HPE FlexNetwork MSR Router Series Configuration Manual

Table of Contents

Advertisement

Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable RSVP authentication
on the interface and
configure the authentication
key.
4.
Enable challenge-response
handshake on the interface.
5.
Set the idle timeout for RSVP
security associations on the
interface.
6.
Set the maximum number of
out-of-sequence RSVP
authentication messages
that can be received on the
interface.
To configure RSVP authentication in RSVP view:
Step
1.
Enter system view.
2.
Enter RSVP view.
3.
Enable RSVP authentication
globally and configure the
authentication key.
4.
Enable challenge-response
handshake globally.
5.
Set the global idle timeout for
RSVP security associations.
6.
Set the global RSVP
authentication window size
(the maximum number of
RSVP authenticated
messages that can be
received out of sequence).

Setting a DSCP value for outgoing RSVP packets

The DSCP value of an IP packet specifies the priority level of the packet and affects the transmission
priority of the packet.
To set a DSCP value for outgoing RSVP packets:
Step
1.
Enter system view.
Command
system-view
interface interface-type
interface-number
rsvp authentication key { cipher
| plain } auth-key
rsvp authentication challenge
rsvp authentication lifetime
life-time
rsvp authentication
window-size number
Command
system-view
rsvp
authentication key { cipher |
plain } auth-key
authentication challenge
authentication lifetime life-time
authentication window-size
number
Command
system-view
171
Remarks
N/A
N/A
By default, RSVP authentication
is disabled.
Do not enable both RSVP
authentication and FRR on the
same interface.
By default, the
challenge-response handshake
function is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A
N/A
By default, RSVP authentication
is disabled.
By default, the
challenge-response handshake
function is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A

Advertisement

Table of Contents
loading

Table of Contents