HP HPE FlexNetwork MSR Router Series Configuration Manual page 80

Table of Contents

Advertisement

Nexthop
: -
[RouterD] display mpls ldp lsp ipv6
Status Flags: * - stale, L - liberal, B - backup
FECs: 2
FEC: 11::/64
In/Out Label: 1098/-
Nexthop
: -
FEC: 21::/64
In/Out Label: 1097/-
Nexthop
: -
The output shows that Router A and Router C have received FEC-label mappings only from Router B.
Router B has received FEC-label mappings from both Router A and Router C. Router D does not
receive FEC-label mappings from Router A or Router C. LDP has established an IPv6 LSP only over
the link Router A—Router B—Router C.
# Test the connectivity of the IPv6 LDP LSP from Router A to Router C.
[RouterA] ping ipv6 -a 11::1 21::1
Ping6(56 data bytes) 11::1 --> 21::1, press CTRL_C to break
56 bytes from 21::1, icmp_seq=0 hlim=63 time=4.000 ms
56 bytes from 21::1, icmp_seq=1 hlim=63 time=3.000 ms
56 bytes from 21::1, icmp_seq=2 hlim=63 time=3.000 ms
56 bytes from 21::1, icmp_seq=3 hlim=63 time=2.000 ms
56 bytes from 21::1, icmp_seq=4 hlim=63 time=1.000 ms
--- Ping6 statistics for 21::1 ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 1.000/2.600/4.000/1.020 ms
# Test the connectivity of the IPv6 LDP LSP from Router C to Router A.
[RouterC] ping ipv6 -a 21::1 11::1
Ping6(56 data bytes) 21::1 --> 11::1, press CTRL_C to break
56 bytes from 11::1, icmp_seq=0 hlim=63 time=1.000 ms
56 bytes from 11::1, icmp_seq=1 hlim=63 time=2.000 ms
56 bytes from 11::1, icmp_seq=2 hlim=63 time=1.000 ms
56 bytes from 11::1, icmp_seq=3 hlim=63 time=2.000 ms
56 bytes from 11::1, icmp_seq=4 hlim=63 time=1.000 ms
--- Ping6 statistics for 11::1 ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 1.000/1.400/2.000/0.490 ms
Ingress: 0
70
Transit: 0
Egress: 2
OutInterface : -
OutInterface : -

Advertisement

Table of Contents
loading

Table of Contents