HP HPE FlexNetwork MSR Router Series Configuration Manual page 174

1.1.1.1/0/1
2.1.1.2
[RouterB] display mpls lsp
FEC
-
3.2.1.2
[RouterC] display mpls lsp
FEC
-
[RouterA] display mpls static-cr-lsp
Name LSR Type
static-cr-lsp-1 Ingress
[RouterB] display mpls static-cr-lsp
Name LSR Type
static-cr-lsp-1 Transit
[RouterC] display mpls static-cr-lsp
Name LSR Type
static-cr-lsp-1 Egress
# Execute the display ip routing-table command on Router A. The output shows a static route entry
with interface Tunnel 0 as the output interface.
[RouterA] display ip routing-table
Destinations : 12
Destination/Mask
0.0.0.0/32
1.1.1.1/32
2.1.1.0/24
2.1.1.0/32
2.1.1.1/32
2.1.1.255/32
2.2.2.2/32
100.1.2.0/24
3.3.3.3/32
6.1.1.0/24
6.1.1.0/32
6.1.1.1/32
6.1.1.255/32
StaticCR -/20
Local -/-
Proto In/Out Label
StaticCR 20/30
Local -/-
Proto In/Out Label
StaticCR 30/-
In/Out Label
Null/20
In/Out Label
20/30
In/Out Label
30/Null
Routes : 12
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
IS_L1 15 10
Static 1 0
IS_L1 15 20
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
164
GE2/0/1
GE2/0/1
Interface/Out NHLFE
GE2/0/2
GE2/0/2
Interface/Out NHLFE
-
Out Interface
GE2/0/1
Out Interface
GE2/0/2
Out Interface
-
NextHop Interface
127.0.0.1 InLoop0
127.0.0.1 InLoop0
2.1.1.1 GE2/0/1
2.1.1.1 GE2/0/1
127.0.0.1 InLoop0
2.1.1.1 GE2/0/1
2.1.1.2 GE2/0/1
0.0.0.0 Tun0
2.1.1.2 GE2/0/1
6.1.1.1 Tun0
6.1.1.1 Tun0
127.0.0.1 InLoop0
6.1.1.1 Tun0
State
Up
State
Up
State
Up