Enabling Snmp Notifications For Mpls; Displaying And Maintaining Mpls - HP HPE FlexNetwork MSR Router Series Configuration Manual

Step
2. Enable split horizon for
MPLS forwarding.

Enabling SNMP notifications for MPLS

This feature enables MPLS to generate SNMP notifications. The generated SNMP notifications are
sent to the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
To enable SNMP notifications for MPLS:
Step
1. Enter system view.
2. Enable SNMP
notifications for MPLS.

Displaying and maintaining MPLS

Execute display commands in any view and reset commands in user view.
Task
Display MPLS interface information.
Display usage information for MPLS
labels.
Display LSP information.
Display MPLS Nexthop Information
Base (NIB) information.
Display usage information for NIDs.
Display LSP statistics.
Display MPLS summary information.
Display MPLS label forwarding statistics
for VPN instances.
Display ILM entries (centralized devices
in standalone mode).
Display ILM entries (distributed devices
in standalone mode/centralized devices
in IRF mode).
Display ILM entries (distributed devices
in IRF mode).
Display NHLFE entries (centralized
Command
mpls forwarding split-horizon
Command
system-view
snmp-agent trap enable mpls
Command
display mpls interface [ interface-type interface-number ]
display mpls label { label-value1 [ to label-value2 ] | all }
display mpls lsp [ egress | in-label label-value | ingress |
outgoing-interface interface-type interface-number | protocol
{ bgp | ldp | local | rsvp-te | static | static-cr } | transit ]
[ vpn-instance vpn-instance-name ] [ ipv4-dest mask-length |
ipv6 [ ipv6-dest prefix-length ] ] [ verbose ]
display mpls nib [ nib-id ]
display mpls nid [ nid-value1 [ to nid-value2 ] ]
display mpls lsp statistics
display mpls summary
display ip vpn-instance mpls statistics [ instance-name
vpn-instance-name ]
display mpls forwarding ilm [ label ]
display mpls forwarding ilm [ label ] [ slot slot-number ]
display mpls forwarding ilm [ label ] [ chassis chassis-number
slot slot-number ]
display mpls forwarding nhlfe [ nid ]
11
Remarks
By default, split horizon is
disabled for MPLS forwarding.
Remarks
N/A
By default, SNMP notifications for
MPLS are enabled.