Table of Contents
Advertisement
0 packets output, 0 bytes 0 drops
# Execute the display mpls te tunnel-interface command on Router A to display detailed
information about the MPLS TE tunnel.
[RouterA] display mpls te tunnel-interface
Tunnel Name
Tunnel State
Tunnel Attributes
LSP ID
Admin State
Ingress LSR ID
Signaling
Resv Style
Tunnel mode
Reverse-LSP name
Reverse-LSP LSR ID
Class Type
Reserved Bandwidth
Setup Priority
Affinity Attr/Mask
Explicit Path
Backup Explicit Path : -
Metric Type
Record Route
FRR Flag
Backup Bandwidth Flag: Disabled
Backup Bandwidth
Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Execute the display mpls te link-management bandwidth-allocation command on Router A to
display bandwidth information on interface GigabitEthernet 2/0/1.
[RouterA] display mpls te link-management bandwidth-allocation interface gigabitethernet
2/0/1
Interface:
GigabitEthernet2/0/1
Max Link Bandwidth
Max Reservable Bandwidth of Prestandard RDM : 0 kbps
Max Reservable Bandwidth of IETF RDM
Max Reservable Bandwidth of IETF MAM
Allocated Bandwidth-Item Count
Allocated Bandwidth
Physical Link Status
BC
Prestandard RDM(kbps)
: Tunnel 1
: Up (Main CRLSP up, Shared-resource CRLSP down)
:
: 36882
Tunnel ID
: Normal
: 1.1.1.9
Egress LSR ID
: RSVP-TE
Static CRLSP Name
: SE
: -
: -
: -
Reverse-LSP Tunnel ID: -
: CT2
Tunnel Bandwidth
: 4000 kbps
: 0
Holding Priority
: 0/0
: -
: TE
: Disabled
Record Label
: Disabled
Bandwidth Protection : Disabled
Backup Bandwidth Type: -
: -
: No
Auto Created
: Disabled
: 10
Retry Interval
: Disabled
Reoptimization Freq
: None
Backup LSP ID
: Disabled
Auto Bandwidth Freq
: -
Max Bandwidth
: -
: 1
: 4000 kbps
: Up
IETF RDM(kbps)
156
: 1
: 4.4.4.9
: -
: 4000 kbps
: 0
: Disabled
: No
: 2 sec
: -
: -
: -
: -
: 10000 kbps
: 10000 kbps
: 0 kbps
IETF MAM(kbps)
Advertisement
Table of Contents
