Table of Contents
Advertisement
Step
view.
3.
Enter cross-connect view.
4.
Enable interworking for the
cross-connect.
Enabling SNMP notifications for L2VPN PW
This feature enables the L2VPN module to generate SNMP notifications upon PW status changes.
The generated SNMP notifications are sent to the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
To enable SNMP notifications for L2VPN PW:
Step
1.
Enter system view.
2.
Enable SNMP notifications
for L2VPN PW.
Displaying and maintaining MPLS L2VPN
Execute display commands in any view and reset commands in user view.
Task
Display LDP PW label information.
Display cross-connect forwarding
information (centralized devices in
standalone mode).
Display cross-connect forwarding
information (distributed devices in
standalone mode/centralized devices
in IRF mode).
Display cross-connect forwarding
information (distributed devices in
IRF mode).
Display L2VPN information for the
Layer 3 interface bound to a
cross-connect.
Display L2VPN PW information.
Display PW class information.
Display cross-connect group
information.
Display L2VPN label block
information.
Command
connection connection-name
interworking ipv4
Command
system-view
snmp-agent trap enable l2vpn
[ pw-up-down | pw-delete ] *
Command
display l2vpn ldp [ peer ip-address [ pw-id pw-id ] |
xconnect-group group-name ] [ verbose ]
display l2vpn forwarding { ac | pw } [ xconnect-group
group-name ] [ verbose ]
display l2vpn forwarding { ac | pw } [ xconnect-group
group-name ] [ slot slot-number ] [ verbose ]
display l2vpn forwarding { ac | pw } [ xconnect-group
group-name ] [ chassis chassis-number slot slot-number ]
[ verbose ]
display l2vpn interface [ xconnect-group group-name |
interface-type interface-number ]
display l2vpn pw [ xconnect-group group-name ] [ protocol { bgp
| ldp | static } ] [ verbose ]
display l2vpn pw-class [ class-name ]
display l2vpn xconnect-group [ name group-name ] [ verbose ]
display l2vpn bgp [ peer ip-address | local ] [ xconnect-group
group-name ] [ verbose ]
422
Remarks
N/A
By default, the cross-connect
does not support interworking.
Remarks
N/A
By default, SNMP notifications for
L2VPN PW are enabled.
Advertisement
Table of Contents
