Configuring Bgp Vpnv6 Route Control - HP HPE FlexNetwork MSR Router Series Configuration Manual

Step
2. Enter BGP view.
3. Configure the remote PE as
the peer.
4. Specify the source interface
for route update packets sent
to the specified peer.
5. Create the BGP VPNv6
address family and enter its
view.
6. Enable BGP VPNv6 route
exchange with the specified
peer.

Configuring BGP VPNv6 route control

BGP VPNv6 route control is configured similarly with BGP route control, except that it is configured in
BGP VPNv6 address family view. For detailed information about BGP route control, see Layer 3—IP
Routing Configuration Guide.
To configure BGP VPNv6 route control:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP VPNv6 address
family view.
4. (Optional.) Configure filtering
of advertised routes.
5. (Optional.) Configure filtering
of received routes.
6. Configure ACL-based route
filtering for the specified peer
or peer group.
7. Configure IPv6 prefix
list-based route filtering for
the specified peer or peer
group.
8. Specify a preferred value for
routes received from the
peer or peer group.
9. Configure BGP updates sent
to the peer to carry only
public AS numbers.
Command
bgp as-number
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
peer { group-name | ip-address
[ mask-length ] }
connect-interface interface-type
interface-number
address-family vpnv6
peer { group-name | ip-address
[ mask-length ] } enable
Command
system-view
bgp as-number
address-family vpnv6
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
import
peer { group-name | ip-address
[ mask-length ] } filter-policy
acl6-number { export | import }
peer { group-name | ip-address
[ mask-length ] } prefix-list
ipv6-prefix-name { export |
import }
peer { group-name | ip-address
[ mask-length ] } preferred-value
value
peer { group-name | ip-address
[ mask-length ] } public-as-only
341
Remarks
N/A
By default, no BGP peer is
configured.
By default, BGP uses the
outbound interface of the best
route to the BGP peer as the
source interface.
By default, the BGP VPNv6
address family is not created.
By default, BGP does not
exchange BGP VPNv6 routes
with any peer.
Remarks
N/A
N/A
N/A
By default, the PE does not filter
advertised routes.
By default, the PE does not filter
received routes.
By default, no ACL-based route
filtering is configured.
By default, no IPv6 prefix
list-based route filtering is
configured.
The default preferred value is 0.
By default, a BGP update carries
both public and private AS
numbers.