HP HPE FlexNetwork MSR Router Series Configuration Manual page 158

[RouterB] display interface tunnel brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Tun50
Tun51
# Execute the display mpls te tunnel-interface command on Router B to display information about
Tunnel 50 and Tunnel 51. The output shows that Tunnel 50 and Tunnel 51 are automatically created
bypass tunnels. Tunnel 50 is a node-protection bypass tunnel (egress LSR ID is 4.4.4.4, the LSR ID
of Router D). Tunnel 51 is a link-protection bypass tunnel (egress LSR ID is 3.3.3.3, the LSR ID of
Router C).
[RouterB] display mpls te tunnel-interface tunnel 50
Tunnel Name
Tunnel State
Tunnel Attributes
LSP ID
Admin State
Ingress LSR ID
Signaling
Resv Style
Tunnel mode
Reverse-LSP name
Reverse-LSP LSR ID
Class Type
Reserved Bandwidth
Setup Priority
Affinity Attr/Mask
Explicit Path
Backup Explicit Path : -
Metric Type
Record Route
FRR Flag
Backup Bandwidth Flag: Disabled
Backup Bandwidth
Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
[RouterB] display mpls te tunnel-interface tunnel 51
Tunnel Name
Tunnel State
Tunnel Attributes
LSP ID
Admin State
Link Protocol Main IP
DOWN DOWN --
UP DOWN --
: Tunnel 50
: Up (Main CRLSP up, Shared-resource CRLSP down)
:
: 16802
: Normal
: 2.2.2.2
: RSVP-TE
: SE
: -
: -
: -
: CT0
: 0 kbps
: 7
: 0/0
: -
: TE
: Enabled
: Disabled
: -
: Yes
: Disabled
: 3
: Disabled
: None
: Disabled
: -
: -
: Tunnel 51
: Up (Main CRLSP up, Shared-resource CRLSP down)
:
: 16802
: Normal
148
Description
Tunnel ID
Egress LSR ID
Static CRLSP Name
Reverse-LSP Tunnel ID: -
Tunnel Bandwidth
Holding Priority
Record Label
Bandwidth Protection : Disabled
Backup Bandwidth Type: -
Auto Created
Retry Interval
Reoptimization Freq
Backup LSP ID
Auto Bandwidth Freq
Max Bandwidth
Tunnel ID
: 50
: 4.4.4.4
: -
: 0 kbps
: 7
: Disabled
: Yes
: 2 sec
: -
: -
: -
: -
: 51