HP HPE FlexNetwork MSR Router Series Configuration Manual page 372

Interface : InLoop0
Destination: 2001:3::/96
NextHop : ::FFFF:3.3.3.9
Interface : POS2/2/0
Destination: FE80::/10
NextHop : ::
Interface : NULL0
Destination: FF00::/8
NextHop : ::
Interface : NULL0
[PE1] display ipv6 routing-table vpn-instance vpn2
Destinations : 6 Routes : 6
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2001:2::/96
NextHop : ::
Interface : GE2/0/2
Destination: 2001:2::2/128
NextHop : ::1
Interface : InLoop0
Destination: 2001:4::/96
NextHop : ::FFFF:3.3.3.9
Interface : POS2/2/0
Destination: FE80::/10
NextHop : ::
Interface : NULL0
Destination: FF00::/8
NextHop : ::
Interface : NULL0
The output shows that PE 1 has routes to the remote CEs. Output on PE 2 is similar.
# Verify that CEs of the same VPN can ping each other, whereas those of different VPNs should not.
For example, CE 1 can ping CE 3 (2001:3::1), but cannot ping CE 4 (2001:4::1). (Details not shown.)
362
Cost : 0
Protocol : BGP4+
Preference: 255
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : BGP4+
Preference: 255
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0