Table of Contents
Advertisement
Configuring an IPv6 static route
Step
1.
Enter system
view.
2.
Configure an IPv6
static route for a
VPN instance to
reach the multirole
host.
Configuring an OSPFv3 sham link
Before you configure an OSPFv3 sham link, configure basic IPv6 MPLS L3VPN (OSPFv3 is used
between PE and CE).
Configuring a loopback interface
Step
1.
Enter system view.
2.
Create a loopback interface
and enter loopback interface
view.
3.
Associate the loopback
interface with a VPN
instance.
4.
Configure an IPv6 address
for the loopback interface.
Redistributing the loopback interface address
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Enter BGP-VPN instance
view.
4.
Enter BGP-VPN IPv6
unicast address family
view.
Command
system-view
ipv6 route-static vpn-instance
s-vpn-instance-name ipv6-address
prefix-length vpn-instance
d-vpn-instance-name nexthop-address
[ permanent ] [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
Command
system-view
interface loopback
interface-number
ip binding vpn-instance
vpn-instance-name
For configuration details, see Layer
3—IP Services Configuration Guide.
Command
system-view
bgp as-number
ip vpn-instance
vpn-instance-name
address-family ipv6 [ unicast ]
345
Remarks
N/A
By default, no IPv6 static route
is configured.
The d-vpn-instance-name
argument represents the VPN
instance to which the multirole
host belongs. The
next-hop-address argument
represents the IPv6 address of
the CE in the site where the
multirole host resides.
Remarks
N/A
By default, no loopback
interface is created.
By default, the interface is
associated with no VPN
instance.
By default, no IPv6 address is
configured for the loopback
interface.
Remarks
N/A
N/A
N/A
N/A
Advertisement
Table of Contents
