Configuring Routing Between An Mce And A Pe - HP HPE FlexNetwork MSR Router Series Configuration Manual

Step
8. Redistribute remote site
routes advertised by the PE
into BGP.
9. (Optional.) Configure filtering
of advertised routes.
10. (Optional.) Configure filtering
of received routes.
2. Configure a VPN site:
Step
1. Enter system view.
2. Enter BGP view.
3. Configure the MCE as an
IBGP peer.
4. Enter BGP-VPN IPv6 unicast
address family view.
5. Enable BGP to exchange
IPv6 unicast routes with the
peer.
6. Redistribute the IGP routes
of the VPN into BGP.

Configuring routing between an MCE and a PE

MCE-PE routing configuration includes these tasks:
•
Binding the MCE-PE interfaces to IPv6 VPN instances.
•
Performing routing configurations.
•
Redistributing IPv6 VPN routes into the routing protocol running between the MCE and the PE.
Perform the following configuration tasks on the MCE. Configurations on the PE are similar to those
on the PE in common IPv6 MPLS L3VPN networks. For more information, see
between a PE and a
Configuring IPv6 static routing between an MCE and a PE
Step
1. Enter system view.
Command
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
import
Command
system-view
bgp as-number
peer { group-name | ipv6-address
[ prefix-length ] } as-number
as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
CE."
Command
system-view
351
Remarks
By default, no routes are
redistributed into BGP.
By default, BGP does not
filter advertised routes.
By default, BGP does not
filter received routes.
Remarks
N/A
N/A
By default, no BGP peer or
peer group is configured.
N/A
By default, BGP does not
exchange IPv6 unicast
routes with any peer.
By default, no routes are
redistributed into BGP.
A VPN site must advertise
VPN network addresses to
the connected MCE.
"Configuring routing
Remarks
N/A