Adjusting Miscellaneous Functions Of The Inspector - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

6
6.5.3

Adjusting miscellaneous functions of the Inspector

Switching between feature list and program step list
The feature list shows the acquired features whereas the program step list shows
the program steps of the measuring program.
Further information:
...
Creating or saving a measuring program
With the miscellaneous functions of the Inspector, you can create a new
measuring program or save acquired features as a measuring program.
Further information:
...
82
"Programming", page 271
Tap Miscellaneous functions in the Inspector
Select the Feature list or Program step list display
Activating the program step list also activates the display of
the program control in the workspace
Tap Close to close the miscellaneous functions
"Programming", page 271
Tap Miscellaneous functions in the Inspector
To create a new measuring program, tap New
Tap OK in the dialog
A new measuring program is created and the miscellaneous
functions are closed
To save acquired features as a measuring program, tap Save
as
Tap the input field in the dialog and enter a name for the
measuring program
Confirm the entry with RET
Tap OK
The measuring program is saved
The miscellaneous functions are closed
Basic operation | Using the Inspector
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016