HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 143

Setup | Setup steps
Configuring the network drive
For the network drive details, such as IP address or host name of the server,
shared folders, etc., contact your network administrator.
Further information:
Setting up a printer
Requirement:
Further information:
Adding a USB printer
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Tap Settings in the main menu
Tap Interfaces
Tap Network drive
Enter the network drive details
Confirm the entries with RET
Use the ON/OFF sliding switch to activate or deactivate Show
password
If required, select Network drive options
Tap Mount
The connection to the network drive is established
"Network drive", page 334
A printer is connected.
"Connecting printers", page 48
Tap Settings in the main menu
Tap General
Tap Printers
If no default printer has been set up yet, a message appears
Tap "Close" in the message
8
143