Using The Inspector; Operating Elements Of The Inspector - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Basic operation | Using the Inspector
6.5

Using the Inspector

The Inspector is only available in the Measure menu.
Activation
6.5.1

Operating elements of the Inspector

The Inspector comprises the following areas and operating elements:
Quick access menu
Position preview (only available in the manual measuring function)
Features preview (only available in the manual measuring function and the
definition function)
Live image preview (only available in the manual measuring function and if the
QUADRA-CHEK 3000 VED software option is active)
Feature list or program step list
Miscellaneous functions
Undo (only available in the manual measuring function)
Enter (only available in the manual measuring function)
Operating
element
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Tap Measure in the main menu
The user interface for measuring, constructing and defining is
displayed
Short description
Quick access menu
The quick access menu displays the current settings for
manual measuring, constructing and defining:
Unit for linear values (millimeters or inches)
Selected magnification
Type of measuring point acquisition (automatic or
manual)
Timeout for automatic measuring point acquisition
To adjust the settings of the quick access menu, tap the
quick access menu
Position preview
The position preview is only available in the manual
measuring function.
The current axis positions are displayed.
If no reference mark search has been performed, the axis
positions are displayed in red.
Further information: "Conducting the reference mark
search", page 203
To display the position preview in the workspace, tap
the position preview
The position preview is displayed in the workspace
The current content of the workspace switches to the
Inspector
6
77