HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 124

7
Setting the lighting
Linking the lighting to the magnification
The light intensity that reaches the VED sensor, e.g. through the camera optics,
decreases with increasing magnification. To compensate the reduced brightness,
you can link the lighting to the magnification.
124
Tap Settings in the main menu
Tap Sensors
Open in the sequence
Video edge detection (VED)
Lighting
Tap General settings
To activate or deactivate the link between the lighting and the
magnification, drag the ON/OFF sliding switch to the desired
setting
When the link is active, the lighting settings are saved for the
respective magnification
When the link is not active, you need to manually adjust the
lighting if you change the magnification
Commissioning | Commissioning steps
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016