Personnel Qualification; Obligations Of The Operating Company - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Safety | Personnel qualification
2.4

Personnel qualification

The personnel for mounting, installation, operation, service, maintenance and
removal must be appropriately qualified for this work and must have obtained
sufficient information from the documentation supplied with the product and with
the connected peripherals.
The personnel required for the individual activities to be performed on the product
are indicated in the respective sections of these instructions.
The personnel groups that are responsible for mounting, installation, operation,
maintenance and removal have different qualifications and tasks, which are
specified as follows.
Operator
The operator uses and operates the product within the framework specified for the
intended use. The user is informed by the operating company about the special
tasks and about the potential risks involved with improper handling.
Qualified personnel
The qualified personnel are trained by the operating company to perform advanced
operation and parameterization. The qualified personnel have the required technical
training, knowledge and experience and know the applicable regulations, and are
thus capable of performing the assigned work regarding the application concerned
and of proactively identifying and avoiding potential risks.
Electrical specialist
The electrical specialist has the required technical training, knowledge and
experience and knows the applicable standards and regulations, and is thus
capable of performing work on electrical systems and of proactively identifying and
avoiding potential risks. Electrical specialists have been specially trained for the
environment they work in.
Electrical specialists must comply with the provisions of the applicable legal
regulations on accident prevention.
2.5

Obligations of the operating company

The operating company owns or leases the product and the peripherals. It is
responsible that the intended use is complied with at all times.
The operating company must:
Assign the different tasks to be performed on the product to appropriate,
qualified and authorized personnel
Verifiably train the personnel in the authorizations and tasks
Provide all materials and means necessary in order for the personnel to
complete the assigned tasks
Ensure that the product is operated only when in perfect technical condition
Ensure that the product is protected from unauthorized use
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
2
19