HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 152

8
Measuring point filter
During a measurement, you can filter out measuring points that are outside the
defined criteria.
Further information:
152
Tap Settings in the main menu
Tap Features
Tap Measuring point filter
To activate or deactivate the filter during measuring point
acquisition, drag the ON/OFF sliding switch to the desired
setting
In the Error limit input field, specify the tolerance of the
measuring point filter
In the Confidence interval (±xσ) input field, specify the
number of measuring points allowed outside the error limit
In the Minimum % proportion of retained points input field,
specify the minimum percentage of measuring points that
must be used for the measurement
"Measuring point filter", page 330
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Setup | Setup steps