HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 290

13
Filtering features
You can filter the feature list in the Features menu by type, size, tolerance and
selection. Only features meeting the filter criteria are displayed, e.g. only circles
with a specific minimum diameter.
You can use any combination of filters.
Filter
Type
Size
Tolerance
Selection
290
Select the desired filter criterion
Specify the operator
Select the function
To deactivate a filter criterion, tap Close next to the filter
Operator Function
Is
Only features of the selected geometry type
are displayed.
Is not
Only features that are not of the selected
geometry type are displayed.
Equal
Only features of the specified size are
displayed.
Greater than
Only features that are larger than the specified
size are displayed.
Less than
Only features that are smaller than the speci-
fied size are displayed.
Is
Only features that meet the selected character-
istic are displayed:
Passed
Failed
Inactive
Is not
Only features that do not meet the selected
characteristic are displayed.
Is
Only the selected features are displayed.
Is not
Only the unselected features are displayed.
Measurement report | Creating a measurement report
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016