Saving The Template - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

13
Adjusting the data table
You can resize the data table with the square handles at the corners of the data
table. The sequence of form fields in the list determines how the columns are
arranged in the table. To adjust the width of the columns in the data table, use the
diamond-shaped handles.
13.4.6

Saving the template

The templates are saved in the XMT data format.
13.4.7 Exiting or canceling the creation of a template
302
Tap Grid to use auxiliary lines for easy alignment
Use the square handles to resize and position the data table
as needed
To rearrange the columns, long press the form field in the list
and drag it to the desired position in the list
Adjust the column width with the diamond-shaped handles
Columns that are outside the print area are marked red
The changes to the data table are applied
To save the template, tap Save as
The Save as dialog appears
Select a storage location, e.g. Internal/Reports
Enter a name for the template
Confirm entry with RET
Tap OK
The template is saved and can be used for measurement
reports
When creating or editing a template, you need to save the template
before closing it. Otherwise, the editing process will be canceled and
the changes will be discarded.
Further information: "Saving the template", page 302
Tap Close to exit or cancel the creation of the template or
measurement report
Tap OK to close the message
The editor is closed
Measurement report | Creating and editing a template
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016